Gates® Power Transmission PowerGrip® 480L100 Light Timing Belt, 1 in W, 48 in OAL, 3/8 in Pitch, 128 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053564891
-
Manufacturer Part Number480L100
-
CountryUSA|Canada
-
Pitch3/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeLight
-
Minimum Pulley Diameter1.88 in
-
Width1 in
-
Series9257
-
Number of Teeth128
-
Overall Length48 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92572316
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® 480L100 Light Timing Belt, 1 in W, 48 in OAL, 3/8 in Pitch, 128 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Enerpac® GF10P Glycerin Filled Lower Mount Hydraulic Force and Pressure Gauge, 0 to 10000 psi, 4.3 in Dia Gauge, 1/2 in NPTF Connection, +/-1% Full Scale Accuracy, Stainless Steel
Enerpac® GF10P Glycerin Filled Lower Mount Hydraulic Force and Pressure Gauge, 0 to 10000 psi, 4.3 in Dia Gauge, 1/2 in NPTF Connection, +/-1% Full Scale Accuracy, Stainless Steel
Browning® 1032200 AK Series Type 2 FHP Sheave, 1 in Finished Bore, 3-3/4 in OD, 2 Grooves, 3.7 in (A)/3.16 in (3L) Dia Pitch, 1-3/8 in W Face
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Use this lever Control Valve with two way valve on air, fluid and vacuum lines. Perfect for tire changing machines, this Control Valve has a 1/4 in FNPT inlet and a 1/4 in FNPT outlet. Has a maximum working pressure of 150 psi and offers 24.5 scfm at 100 psi.
1/2" -ID LOW PILLOW BLOCK UNIT-FYHEBSL2018 >
FLANGES-DOD6011734>
