Gates® Power Transmission PowerGrip® 480L050 Light Timing Belt, 1/2 in W, 48 in OAL, 3/8 in Pitch, 128 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
-
BrandGates® Power Transmission
-
UPC72053564358
-
Manufacturer Part Number480L050
-
CountryUSA|Canada
-
Pitch3/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeLight
-
Minimum Pulley Diameter1.88 in
-
Width1/2 in
-
Series9257
-
Number of Teeth128
-
Overall Length48 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- The trapezoidal tooth profile makes this belt well suited for use in positioning applications
-
Alternative Part Number92572116
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Specification Sheet
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® 480L050 Light Timing Belt, 1/2 in W, 48 in OAL, 3/8 in Pitch, 128 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
3/4" -MALE PIPE THREADX5-1/2" BLACK NIPPLE-FIT3/4X51/2XHBN >
MasterDrive H13/16 H Series Double Split Tapered Bushing, 3/16 in Dia Bore, 1-5/8 in Dia Barrel, 2-1/2 in Dia Flange, 1-11/32 in OAL, Powdered Metal
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
Gates® Power Transmission Metric-Power™ XPA1400 Heavy Duty Molded Notch V-Belt, XPA Section, 13 mm W Top, 1417 mm L Outside, 10 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.
Gates® Power Transmission Polyflex® 5M325 Light Duty V-Belt, 5M Section, 3/16 in W Top, 12.8 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Gates® Power Transmission Metric-Power™ XPA1600 Heavy Duty Molded Notch V-Belt, XPA Section, 13 mm W Top, 1616 mm L Outside, 10 mm THK, EPDM
Manufactured to our exacting standards for quality, safety, and dependability. Their proprietary construction ensures unmatched load-carrying capacity paired with superior flex and stretch resistance.

