Gates® Power Transmission PowerGrip® Twin Power® TP390L075 Light Timing Belt, 3/4 in W, 39 in OAL, 3/8 in Pitch, 104 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC72053615180
-
Manufacturer Part NumberTP390L075
-
CountryUSA|Canada
-
Pitch3/8 in
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Reinforced MaterialFiberglass
-
TypeLight
-
Minimum Pulley Diameter2.83 in
-
Width3/4 in
-
Series9246
-
Number of Teeth104
-
Overall Length39 in
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor
- Neoprene body provides protection against grime, grease, oil and moisture
- Belt capacity is equal to standard single-sided PowerGrip® timing belts
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
-
Alternative Part Number92462213
-
UNSPSC26111802
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® Twin Power® TP390L075 Light Timing Belt, 3/4 in W, 39 in OAL, 3/8 in Pitch, 104 Teeth, Neoprene
PowerGrip™ Twin Power™ Timing Belts are suitable for all industrial serpentine applications that require rotation reversal in some driven shafts. Twin Power belts have precision-formed elastomeric teeth on both sides to provide high-loading capacity synchronization from both driving surfaces. Due to its double and directly opposite teeth, Twin Power synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates PowerGrip Twin Power belts are designed to perform at high speeds and in extreme temperatures, with a larger tooth profile for increased performance capacity.
Gates® Power Transmission PowerGrip® 600H075 Heavy Timing Belt, 3/4 in W, 60 in OAL, 1/2 in Pitch, 120 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
1-15/16" -ID 2-BOLT FLANGE UNIT-FYHEAFL21031 >
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Gates® Power Transmission PowerGrip® 250XL037 Extra Light Timing Belt, 3/8 in W, 25 in OAL, 0.2 in Pitch, 125 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
50-MM-ID 2-BOLT FLANGE UNITS-INARCJT50>
