Gates® Power Transmission PowerGrip® HTD® 255-3M-15 Synchronous Belt, 15 mm W, 255 mm OAL, 3 mm Pitch, 85 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
-
BrandGates® Power Transmission
-
UPC072053610222
-
Manufacturer Part Number255-3M-15
-
CountryUSA|Canada
-
Pitch3 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Width15 mm
-
Series9293
-
Number of Teeth85
-
Overall Length255 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Thirty percent increase in horsepower ratings, as compared to traditional timing belts
-
Alternative Part Number92930398
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® HTD® 255-3M-15 Synchronous Belt, 15 mm W, 255 mm OAL, 3 mm Pitch, 85 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
Gates® Power Transmission MegaCrimp™ 8G-10FJX90M G25 Medium Bent Tube Hydraulic Coupling, 1/2 in x 7/8-14 Nominal, Hose x 37 deg Female JIC Flare Swivel, Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
Gates® Power Transmission MegaCrimp™ 12G-14FJX G25 Straight Hydraulic Coupling, 3/4 in x 1-3/16-12 Nominal, Hose x 37 deg Female JIC Flare Swivel, Carbon Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
SS1 Series Cost Efficient Design Wrap-Around Lens Design Built-In Side Shields Extendable length spatula temples The SS1 series features a one-piece polycarbonate lens and a stylish wrap-around design that offers the user a wide area of protection. Integral side shields offer protection from particles entering the eyewear from the sides. The SS1 provides an exceptionally wide angle of unrestricted vision, allowing you to safely assess your environment. The molded-in nose bridge comfortably fits a wide variety of faces. It features a stylish wrap-around design and a one-piece polycarbonate lens with integral side shields that filter out 99.9 percent of UV radiation. The lightweight frame provides added comfort and balance. If you are looking for the best safety glasses, look no further than MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
HCI Preferred Supplier 28062L Light Pattern Pipe Coupling, 3/4 in Nominal, FNPT End Style, Brass
HCI Preferred Supplier 28062L Light Pattern Pipe Coupling, 3/4 in Nominal, FNPT End Style, Brass
Browning® 1001718 TB Series Type 13 Web Multiple Sheave, 3/4 to 1-3/4 in Split Taper Bore, 5.35 in OD, 6 Grooves, 4.8 in (A)/5.3 in (B) Dia Pitch, 4-3/4 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
