Gates® Power Transmission PowerGrip® HTD® 177-3M-06 Synchronous Belt, 6 mm W, 177 mm OAL, 3 mm Pitch, 59 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
-
BrandGates® Power Transmission
-
UPC72053609295
-
Manufacturer Part Number177-3M-06
-
CountryUSA|Canada
-
Pitch3 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Width6 mm
-
Series9293
-
Number of Teeth59
-
Overall Length177 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Thirty percent increase in horsepower ratings, as compared to traditional timing belts
-
Alternative Part Number92930303
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® HTD® 177-3M-06 Synchronous Belt, 6 mm W, 177 mm OAL, 3 mm Pitch, 59 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
United Abrasives-SAIT 70029 2A Premium Coated Flap Wheel, 1-1/2 in Dia, 1/2 in W Face, 1/4 in Dia Shank, 240 Grit, Very Fine Grade, Aluminum Oxide Abrasive
NEMESIS : BLACK FRAME, CLEAR AF-AMS3000355 >
3 45-D BUTT WELD ELBOW
1-GALLON NEUTRAL CLEANER - ML-DS4721G>
TRAKROL® bearings feature black oxide treated bearing steel. They utilize either a precision ball or tapered roller bearing insert for longer operating life under combination radial and thrust loads. The capacity for combination loads allows the TRAKROL® bearing to be available in plain (cylindrical), V-groove and flanged outside diameter in both stud and yoke styles. Small sizes less than 3 in outside diameter or point diameter use sealed ball bearing inserts. They also use a NYLAPLATE® seal for additional protection. Stud type configurations utilize a metal end plug seal on the roller face providing a long lasting seal. Both bearing types provide a large internal grease reservoir along with special sealing. This makes TRAKROL® bearings an excellent choice where reduced maintenance is required.
