Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2800-8MGT-20 9232 Synchronous Belt, 350 Teeth, 8 mm Pitch, 2800 mm OAL, 20 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC72053611618
-
Manufacturer Part NumberTP2800-8MGT-20
-
CountryUSA|Canada
-
Pitch8 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Minimum Pulley Diameter59.74 mm
-
Width20 mm
-
Series9232
-
Number of Teeth350
-
Overall Length2800 mm
- Fiberglass tensile cord provides high-strength, excellent flex life and high resistance to elongation
- Belt capacity is equal to standard single-sided PowerGrip® GT®2 belts
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
- Substantially quieter operation enables wide application usage
-
Alternative Part Number92320073
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2800-8MGT-20 9232 Synchronous Belt, 350 Teeth, 8 mm Pitch, 2800 mm OAL, 20 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
ActivArmr® 206401 80-100 Heavy Duty General Purpose Gloves, Work, 8, Natural Rubber Latex Palm, Blue/Gray, Knit Wrist Cuff, Resists: Abrasion, Cut and Puncture, Cotton/Polyester Lining
Ansell ActivArmr® 80-100 multi-purpose safety gloves are made for heavy-duty tasks. Their enhanced design ensures mechanical performance and better comfort.
2" ELEC/SERVICE ENTRANCE CAPS-ELEL805CL>
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2310-14MGT-55 9232 Synchronous Belt, 165 Teeth, 14 mm Pitch, 2310 mm OAL, 55 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
Gates® Power Transmission PowerGrip® HTD® 670-5M-25 Synchronous Belt, 25 mm W, 670 mm OAL, 5 mm Pitch, 134 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
Gates® Power Transmission PowerGrip® HTD® 425-5M-15 Synchronous Belt, 15 mm W, 425 mm OAL, 5 mm Pitch, 85 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
