Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2400-8MGT-50 9232 Synchronous Belt, 300 Teeth, 8 mm Pitch, 2400 mm OAL, 50 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC072053612035
-
Manufacturer Part NumberTP2400-8MGT-50
-
CountryUSA|Canada
-
Pitch8 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Minimum Pulley Diameter59.74 mm
-
Width50 mm
-
Series9232
-
Number of Teeth300
-
Overall Length2400 mm
- Fiberglass tensile cord provides high-strength, excellent flex life and high resistance to elongation
- Belt capacity is equal to standard single-sided PowerGrip® GT®2 belts
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
- Substantially quieter operation enables wide application usage
-
Alternative Part Number92320071
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP2400-8MGT-50 9232 Synchronous Belt, 300 Teeth, 8 mm Pitch, 2400 mm OAL, 50 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
.875" X 1.308" X .250" OIL SEALS-TCM081302VL >
90- WATT 130 VOLT CLEAR HALOGEN BULB
1-GAL LATEX EXTERIOR WHITE PRIMER-BLP66GAL >
TCM106202SB>
Dodge® 131835 206 Normal Duty Pillow Block Ball Bearing Unit, 1-1/8 in Dia Bore, 4-1/4 to 5 in L Bolt Center-to-Center, 1.56 in Base to Bore Centerline, 6-1/4 in OAL x 3.19 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value. The Dodge® eccentric ball bearing is manufactured at the state-of-the-art Dodge® bearing plant in Rogersville, Tennessee - an ISO 9002 certified plant.
