Gates® Power Transmission PowerGrip® HTD® 1195-5M-25 Synchronous Belt, 25 mm W, 1195 mm OAL, 5 mm Pitch, 239 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
-
BrandGates® Power Transmission
-
UPC72053611366
-
Manufacturer Part Number1195-5M-25
-
CountryUSA|Canada
-
Pitch5 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Width25 mm
-
Series9293
-
Number of Teeth239
-
Overall Length1195 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Thirty percent increase in horsepower ratings, as compared to traditional timing belts
| Competitor Name | Cross-Reference Number |
|---|---|
| Motion Industries | 00742639 |
-
Alternative Part Number92930583
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® HTD® 1195-5M-25 Synchronous Belt, 25 mm W, 1195 mm OAL, 5 mm Pitch, 239 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
.625" X 1.250" X .250" RADIAL SHAFT SINGLE LIP SOLID GREASE SEAL. NITRILE RUBBER MATERIAL HM14 DESIGN.
Browning® 1012376 Type 15 Web Multiple Sheave, 1.38 to 3.625 in Split Taper Bore, 10 in OD, 8 Grooves, 10 in Dia Pitch, 8-1/4 in W Face
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
.750" X 1.375" X .250" RADIAL SHAFT DOUBLE LIP SOLID OIL SEAL. CRWA1 DESIGN, NITRILE RUBBER LIP MATERIAL
1.000" X 1.828" X .250" OIL SEAL-CHI10050 >
Gates® Power Transmission Hi-Power® II B185 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 188 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
