Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP1600-8MGT-50 9232 Synchronous Belt, 200 Teeth, 8 mm Pitch, 1600 mm OAL, 50 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC072053611984
-
Manufacturer Part NumberTP1600-8MGT-50
-
CountryUSA|Canada
-
Pitch8 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Minimum Pulley Diameter59.74 mm
-
Width50 mm
-
Series9232
-
Number of Teeth200
-
Overall Length1600 mm
- Fiberglass tensile cord provides high-strength, excellent flex life and high resistance to elongation
- Belt capacity is equal to standard single-sided PowerGrip® GT®2 belts
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
- Substantially quieter operation enables wide application usage
-
Alternative Part Number92320055
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Specification Sheet
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP1600-8MGT-50 9232 Synchronous Belt, 200 Teeth, 8 mm Pitch, 1600 mm OAL, 50 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
Gates® Power Transmission Hi-Power® II B255 Banded Classical Heavy Duty V-Belt, B Section, 21/32 in W Top, 256 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
LS-T-050-H BANJO 1/2" Strainer Head for LSTM050-C - LSTM050 - LSTM075-C - LSTM075
The Banjo LSTM050 series refers to a lineup of high-quality 1/2-inch Polypropylene Mini T-Line Strainers manufactured by Banjo Corporation. These heavy-duty, glass-reinforced inline filters protect fluid handling equipment, pumps, and spray nozzles from debris.
Gates® Power Transmission Polyflex® 5M800 Light Duty V-Belt, 5M Section, 3/16 in W Top, 31-1/2 in L Outside, 1/8 in THK, High Modulus Polyurethane
Developed by Gates and produced to patented manufacturing processes, these belts provide more load-carrying capacity at higher speeds to small multiple V-belt precision drives. This results in significant cost savings and improved design freedom.
Klein® D321-41/2 Midget Long Nose Plier, Knurled Steel Jaw, 1-1/16 in L x 7/16 in W Jaw, 4-13/16 in OAL, 1/16 in W Tip
HCI Preferred Supplier 28140 Long Pipe Nipple, 1/8 in Nominal, 1-1/2 in L, Brass, NPTF End Style
HCI Preferred Supplier 28140 Long Pipe Nipple, 1/8 in Nominal, 1-1/2 in L, Brass, NPTF End Style
