Gates® Power Transmission PowerGrip® HTD® 710-5M-09 Synchronous Belt, 9 mm W, 710 mm OAL, 5 mm Pitch, 142 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
-
BrandGates® Power Transmission
-
UPC72053610680
-
Manufacturer Part Number710-5M-09
-
CountryUSA|Canada
-
Pitch5 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Width9 mm
-
Series9293
-
Number of Teeth142
-
Overall Length710 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Thirty percent increase in horsepower ratings, as compared to traditional timing belts
-
Alternative Part Number92930512
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® HTD® 710-5M-09 Synchronous Belt, 9 mm W, 710 mm OAL, 5 mm Pitch, 142 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
MCR Safety CK110 Checkmate® Value Safety Glasses, Duramass® Hard Coat, Clear Lens, Frameless Frame, Polycarbonate Frame, ANSI Z87+
7/8" -ID NEEDLE BEARING-IKOBA1412 >
1/2" -ID NEEDLE BEARING-IKOYB88 >
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
Morse® AV37 Master Cobalt® Heavy Duty Hole Saw, 2-5/16 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
