Gates® Power Transmission PowerGrip® HTD® 680-5M-15 Synchronous Belt, 15 mm W, 680 mm OAL, 5 mm Pitch, 136 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
-
BrandGates® Power Transmission
-
UPC72053939088
-
Manufacturer Part Number680-5M-15
-
CountryUSA|Canada
-
Pitch5 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Width15 mm
-
Series9293
-
Number of Teeth136
-
Overall Length680 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Thirty percent increase in horsepower ratings, as compared to traditional timing belts
-
Alternative Part Number92932719
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Gates® Power Transmission PowerGrip® HTD® 680-5M-15 Synchronous Belt, 15 mm W, 680 mm OAL, 5 mm Pitch, 136 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
MCR Safety 1211 Industrial Grade General Purpose Gloves, Gunn Cut/Wing Thumb Style, Cowhide Leather Palm, 7 ga Cotton Thread/Leather/Polyester, Gray, Safety Cuff, Resists: Abrasion and Wear, Fleece Lining
MCR Safety 1211 Industrial Grade General Purpose Gloves, Gunn Cut/Wing Thumb Style, Cowhide Leather Palm, 7 ga Cotton Thread/Leather/Polyester, Gray, Safety Cuff, Resists: Abrasion and Wear, Fleece Lining
Dodge® 083431 First Stage Pinion Gear, 43.5 Diametral Pitch, 29 Teeth, 1-1/2 in Dia Pitch
Dodge® 083431 First Stage Pinion Gear, 43.5 Diametral Pitch, 29 Teeth, 1-1/2 in Dia Pitch
MCR Safety MU3624GXL Mustang Personal Protective Gloves, XL, Gauntlet Cuff, Resists: Abrasion/Puncture, ANSI Puncture-Resistance Level: 3
Mustang Leather Drivers Utility Work Gloves Grain Goat Double Palm, Unlined Sewn with DuPont™ Kevlar® Extended Gauntlet Cuff and Wing Thumb This FR Glove has an Arc rating of 28.6 Cal/cm 2 The men and women who work in the electrical industry need gloves that match their hard work and dedication. Therefore, they rely on the industry leader to provide the best hand protection for them. The MCR Safety Mustang Utility field glove, made from top grain leather, provides the required dexterity to feel what you are working with while holding up well against abrasion. The MU3624G gloves have a long gauntlet cuff, premium brown goatskin leather, a reinforced thumb crotch, double palms, fingertips, and knuckles. They are sewn with DuPont™ Kevlar® thread, have shirred elastic around the wrists, and have a comfortable wing thumb design. With an ARC rating of ATPV 28.6 cal/cm2 (HRC3 / CAT3) and a heat attenuation factor (HAF) of 94%, these gloves are safe and reliable. For the best leather glove options, choose MCR Safety.
Dodge® 083386 First Stage Pinion Gear, 64.5 Diametral Pitch, 55 Teeth, 1-1/2 in Dia Pitch
Dodge® 083386 First Stage Pinion Gear, 64.5 Diametral Pitch, 55 Teeth, 1-1/2 in Dia Pitch
UNIVERSAL CHAIN LUBE-RADL711 >
