Gates® Power Transmission PowerGrip® HTD® 565-5M-25 Synchronous Belt, 25 mm W, 565 mm OAL, 5 mm Pitch, 113 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
-
BrandGates® Power Transmission
-
UPC72053611243
-
Manufacturer Part Number565-5M-25
-
CountryUSA|Canada
-
Pitch5 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Width25 mm
-
Series9293
-
Number of Teeth113
-
Overall Length565 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Thirty percent increase in horsepower ratings, as compared to traditional timing belts
-
Alternative Part Number92930570
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® HTD® 565-5M-25 Synchronous Belt, 25 mm W, 565 mm OAL, 5 mm Pitch, 113 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Cotton canvas gloves are ideal for general purpose applications. They keep your hands clean and cool the most popular fabric weights are 8 oz., 10oz., and 12 oz. The 8200A is made with quality 10 ounce polyester cotton canvas and features a wing thumb, knit wrist, and clute pattern.
Browning® 767826 VPE 100 Intermediate Duty High Base Pillow Block Ball Bearing Unit, 1/2 in Dia Bore, 3-3/16 to 4-1/16 in L Bolt Center-to-Center, 1-3/16 in Base to Bore Centerline, 4-7/8 in OAL x 2-7/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Gates® Power Transmission Hi-Power® II PowerBand® 4/B60 Banded Heavy Duty V-Belt, B Section, 21/32 in W Top, 63 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
These Long-Nose pliers are spring-loaded for self-opening action. The slim head design works well in confined areas. Jaws are knurled for sure wrapping and looping of wire. Curved handles provide greater tool control while the joint is hot-riveted for smooth action and no handle wobble. Made of the finest U.S. steel alloy, they are forged, precision machined, hardened, and carefully tempered for maximum strength.
