Gates® Power Transmission PowerGrip® HTD® 535-5M-15 Synchronous Belt, 15 mm W, 535 mm OAL, 5 mm Pitch, 107 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
-
BrandGates® Power Transmission
-
UPC072053610949
-
Manufacturer Part Number535-5M-15
-
CountryUSA|Canada
-
Pitch5 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Width15 mm
-
Series9293
-
Number of Teeth107
-
Overall Length535 mm
- Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
- Nylon tooth facing provides a durable wear surface for long service life
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Thirty percent increase in horsepower ratings, as compared to traditional timing belts
-
Alternative Part Number92930538
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Gates® Power Transmission PowerGrip® HTD® 535-5M-15 Synchronous Belt, 15 mm W, 535 mm OAL, 5 mm Pitch, 107 Teeth, Neoprene
PowerGrip™ HTD belts have a larger, more robust tooth profile for increased capacity, as compared to timing belts. 3M and 5M belts are suitable for domestic appliances, office machines, electric hand tools and for applications in the processing and chemical industry. 8M, 14M and 20M belts are used in high-performance drives in the machine tool, paper and textile industries where durability and low maintenance are required.
25-MM-ID NEEDLE BEARING-NTNHK2512 >
Gates® Power Transmission Hi-Power® II C303 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 305 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
FC-IP-307RE Dodge® 069860 307 Series Expansion Imperial Flange Mount Roller Bearing Unit, 3-7/16 in Dia Bore, 6.09 in L Bolt Center-to-Center, 8.63 in Dia Bolt Circle, Piloted Flange Mount, 10-1/4 in OAL/Dia
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
3.375" X 4.376" X.375" RADIAL SHAFT SEAL WITH METAL CASE AND SKF WAVE LIP. CRW BLACK 3D
GROUNDED QUIET SWITCH, LARGE TERMINAL SCREWS FOR SIDE WIRING UP TO #10 COPPER WIRE. STEEL MOUNTING STRAP, CADMIUM CONTACTS, SINGLE POLE; 120/277V.-JWH501514 >
