Koyo Bearing METRIC TAPERED ROLLER BEARING SETS KOY 30214-JR
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
-
BrandKoyo
-
UPC605790020056
-
Manufacturer Part Number30214JR
-
CountryUSA
-
Load Capacity138 kN Dynamic/173 kN Static
-
Cage MaterialPressed Steel
-
Maximum Speed3100 rpm Grease/4100 rpm Oil
-
TypeCaged
-
Width26.25 mm
-
SeriesMetric Series
-
Number of Rows1
-
Outside Diameter125 mm
-
Bore Diameter70 mm
- Ability to carry radial and axial load in one direction, because an axial component of force is produced when this type of bearing is loaded radially, two bearings are used together facing one another or two or more bearings are matched and used
- There are the standard, medium and steep type which are different in contact angle size, medium tapered metric series bearing are identified by the supplementary code
- Bearing whose cup width, cup small inside diameter and contact angle are determined in accordance with ISO 355 specifications are identified by the supplementary code
-
UNSPSC31171505
-
Standards/ApprovalsABEC1 Class P0
-
Catalog
Recently Viewed
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
CONSOLIDATED BRG SPB-24-ADJ Linear Recirculating Ball Bearing, 1.5 in Dia Shaft, 3.25 in Dia Outside
CONS SPB-24-ADJ Linear Recirculating Ball Bearing, 1.5 in Dia Shaft, 3.25 in Dia Outside
3/4" X 36" METAL HOSE ASSEMBLY-MFXP0220736 >
ALAN 14-THHN YELLOW STRANDED WIRE. THE THHN CONDUCTORS ARE PRIMARILY USED IN CONDUIT AS BRANCH CIRCUITS IN COMMERCIAL OR INDUSTRIAL APPLICATIONS.
TYPE THHN IS AVAILABLE STRANDED IN SIZES 14 AWG -750 KCMIT. THE CONDUCTORS ARE SOFT-ANNEALED, STRANDED OR SOLID COPPER AND ARE INSULATED WITH A TOUGH HEAT AND MOISTURE-RESISTANT POLYVINYL CHLORIDE, OVER WHICH A NYLON JACKSON IS APPLIED.
-ALE14THHNYEL >
Diversitech 6-T1191 One-Handed PVC/Hose Cutter, 1/8 to 1-5/8 in Nominal, 8-1/4 in L, Ergonomic Grip Handle
The ratchet system holds the blade in place while you adjust your grip to increase the pressure. The high carbon steel blade maintains sharpness and resists chipping. These cutters can be used for cutting PVC, CPVC, Polyethylene, PEX and ABS tubing. The cutters have a quick-blade reset and can be used as a one handed operation. With the handle locking strap for safe storage, the easy replacing blade feature and the ergonomically designed handle, these cutters are a perfect addition to any tool box.
