Koyo Bearing METRIC TAPERED ROLLER BEARING SETS KOY 30210-JR
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
-
BrandKoyo
-
UPC605790118364
-
Manufacturer Part Number30210JR
-
CountryUSA
-
Load Capacity76.5 kN Dynamic/91.7 kN Static
-
Cage MaterialPressed Steel
-
Maximum Speed4300 rpm Grease/5700 rpm Oil
-
TypeCaged
-
Width21.75 mm
-
SeriesMetric Series
-
Number of Rows1
-
Outside Diameter90 mm
-
Bore Diameter50 mm
- Ability to carry radial and axial load in one direction, because an axial component of force is produced when this type of bearing is loaded radially, two bearings are used together facing one another or two or more bearings are matched and used
- There are the standard, medium and steep type which are different in contact angle size, medium tapered metric series bearing are identified by the supplementary code
- Bearing whose cup width, cup small inside diameter and contact angle are determined in accordance with ISO 355 specifications are identified by the supplementary code
-
Alternative Part NumberHC30210JR
-
UNSPSC31171505
-
Standards/ApprovalsABEC1 Class P0
-
Catalog
Recently Viewed
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
1/2" PVC TRU-UNION BALL VALVE-NIBU45TBE1/2 >
HYDRAULIC FILTERS
Sharkbite® U3088FLEX15LF Flexible Braided Water Heater Connector, 3/4 in, Push-Fit x FNPT, 15 in L, 200 psi, Stainless Steel, Import
SharkBite's Braided Flexible Water Heater Connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection on the connector to the nipple and tighten with channel locks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve.
Morse® AV92 Master Cobalt® Heavy Duty Hole Saw, 5-3/4 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Weiler® 17605 Conflex Wide Face Wheel Brush, 1-3/4 in Dia Brush, 1/2 in W Face, 0.006 in Dia Crimped Filament/Wire
Weiler® 17605 Conflex Wide Face Wheel Brush, 1-3/4 in Dia Brush, 1/2 in W Face, 0.006 in Dia Crimped Filament/Wire
