CONSOLIDATED BRG HK-2020 Needle Roller Bearing, 20 mm Dia Bore, 26 mm Dia Outside, 1 Rows, 20 mm W, 15.1 kN Dynamic, 26.5 kN Static Load
CONS HK-2020 Needle Roller Bearing, 20 mm Dia Bore, 26 mm Dia Outside, 1 Rows, 20 mm W, 15.1 kN Dynamic, 26.5 kN Static Load
-
BrandCONS
-
UPC644075017046
-
Manufacturer Part NumberHK-2020
-
CountryUSA
-
Load Capacity15.1 kN Dynamic, 26.5 kN Static
-
Maximum Speed8000 rpm Limiting
-
TypeNeedle
-
Width20 mm
-
Number of Rows1
-
Outside Diameter26 mm
-
Bore Diameter20 mm
- The ability to handle a larger, more rigid shaft in a given application
- Excellent rolling characteristics within a small cross section
-
Package DescriptionEACH
Recently Viewed
CONSOLIDATED BRG HK-2020 Needle Roller Bearing, 20 mm Dia Bore, 26 mm Dia Outside, 1 Rows, 20 mm W, 15.1 kN Dynamic, 26.5 kN Static Load
CONS HK-2020 Needle Roller Bearing, 20 mm Dia Bore, 26 mm Dia Outside, 1 Rows, 20 mm W, 15.1 kN Dynamic, 26.5 kN Static Load
CONSOLIDATED BRG HK-4020 Needle Roller Bearing, 40 mm Dia Bore, 47 mm Dia Outside, 1 Rows, 20 mm W, 24.2 kN Dynamic, 53 kN Static Load
CONS HK-4020 Needle Roller Bearing, 40 mm Dia Bore, 47 mm Dia Outside, 1 Rows, 20 mm W, 24.2 kN Dynamic, 53 kN Static Load
HCI Preferred Supplier 29900 Mold Coolant-Line Plug, 1/8 in Nominal, MIP, 200 psi Pressure, Brass/Silicone Seal
HCI Preferred Supplier 29900 Mold Coolant-Line Plug, 1/8 in Nominal, MIP, 200 psi Pressure, Brass/Silicone Seal
GEAR REDUCERS-BRW20GED30L56C>
MiltonĀ® 778 700 A-Style ARO 210 Interchange Coupler, 1/4 in, FNPT, 300 psi, Steel, Domestic
1/4 in MNPT A-style push type Coupler is a push type Coupler simply push plug into Coupler to engage, pull sleeve back to remove. Steel is plated to resist rust. Accepts the following MiltonĀ® A-style plugs - #778, #777, #777-4, #777-6, #1777-4 and #1777-6.1/4 in FNPT A-style plugs are made of case hardened steel and plated to resist rust. Maximum inlet pressure of 300 psi. Has a push type sleeve release.
MiltonĀ® 791 700 L-Style Lincoln Interchange Plug, 1/4 in, MNPT, 300 psi, Hardened Steel, Domestic
1/4 in MNPT L-style Plugs are case hardened steel plated to resist rust and have a working pressure of up to 300 psi. 1/4 in basic flow size with air flow of 32 scfm.
