Koyo B-2812 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 1-3/4 in Dia Bore, 2-1/8 in OD, 1 Row, 3/4 in W, 8830 lb Dynamic/18320 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790215230
-
Manufacturer Part NumberB-2812
-
CountryUSA
-
Load Capacity8830 lb Dynamic/18320 lb Static
-
Temperature Rating-30 to 110 deg C
-
Maximum Speed2400 rpm Grease/3700 rpm Oil
-
Closure TypeOpen
-
TypeOpen Ends Round Bore Uncaged
-
Width3/4 in
-
SeriesB Inch Series
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter2-1/8 in
-
Bore Diameter1-3/4 in
- Full complement bearings handle high radial load carrying capability
- Best used to provide maximum radial load capacity (full complement of rollers, no cage) for thin cross section applications
- A hardened and machined shaft or an "IR" inner ring is required for optimal performance
- A press fit into the housing is required
-
UNSPSC31171512
-
Standards/ApprovalsABEC1|ASTM A1014|ANSI/ABMA 18.2
-
Catalog
Recently Viewed
Koyo B-2812 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 1-3/4 in Dia Bore, 2-1/8 in OD, 1 Row, 3/4 in W, 8830 lb Dynamic/18320 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
24-TOOTH H-BUSHING #40 CHAIN SPROCKET - IDCH40H24>
METRIC TAPERED ROLLER BEARING SET - NTN32205>
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
FHP V-BELTS-BRW4L330>
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
