Koyo B-2824 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 1-3/4 in Dia Bore, 2-1/8 in OD, 1 Row, 1-1/2 in W, 17700 lb Dynamic/44800 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790184888
-
Manufacturer Part NumberB-2824
-
CountryUSA
-
Load Capacity17700 lb Dynamic/44800 lb Static
-
Temperature Rating-30 to 110 deg C
-
Maximum Speed2400 rpm Grease/3700 rpm Oil
-
Closure TypeOpen
-
TypeOpen Ends Round Bore Uncaged
-
Width1-1/2 in
-
SeriesB Inch Series
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter2-1/8 in
-
Bore Diameter1-3/4 in
- Full complement bearings handle high radial load carrying capability
- Best used to provide maximum radial load capacity (full complement of rollers, no cage) for thin cross section applications
- A hardened and machined shaft or an "IR" inner ring is required for optimal performance
- A press fit into the housing is required
-
UNSPSC31171512
-
Standards/ApprovalsABEC1|ASTM A1014|ANSI/ABMA 18.2
-
Catalog
Recently Viewed
Koyo B-2824 Inch Series Open Ends Round Bore Uncaged Drawn Cup Needle Roller Bearing, 1-3/4 in Dia Bore, 2-1/8 in OD, 1 Row, 1-1/2 in W, 17700 lb Dynamic/44800 lb Static Load
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
1-1/8" -ID SPHERICAL INSERT BEARING-FAFRA102RRB >
H-PITCHX125" TIMING BELT-JAS1250H050 >
IKO BAM2824 Inch Series Caged Shell Needle Roller Bearing, 1-3/4 in Dia Bore, 2-1/8 in OD, 1 Row, 1-1/2 in W, 52000 N Dynamic/113000 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
BEARING SHIELD ONESIDE OPEN OTHER-FFS5KD>
