Torrington 1-1/4"-ID NEEDLE BEARINGS TOR BH-2012
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790185090
-
Manufacturer Part NumberBH-2012
-
CountryUSA
-
Load Capacity7440 lb Dynamic/13170 lb Static
-
Temperature Rating-30 to 110 deg C
-
Maximum Speed3300 rpm Grease/5000 rpm Oil
-
Closure TypeOpen
-
TypeHeavy Duty Open Ends Uncaged
-
Width3/4 in
-
SeriesBH Inch Series
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter1-5/8 in
-
Bore Diameter1-1/4 in
- Full complement bearings handle high radial load carrying capability
- Best used to provide maximum radial load capacity (full complement of rollers, no cage) for thin cross section applications
- A hardened and machined shaft or an
- A press fit into the housing is required
-
UNSPSC31171512
-
Standards/ApprovalsABEC1|ASTM A1014|ANSI/ABMA 18.2
-
Catalog
Recently Viewed
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Dremel® T118EF Flexible Jig Saw Blade, 3-5/8 in L x 0.3 in W, 14-18 TPI, Bi-Metal Cutting Edge, Bi-Metal Body
Flexible for Metal blades have bimetal construction for long life and greater flexibility. Designed for cutting sheet metal and thin metals (ferrous and non-ferrous). Ideal for straight or curved cuts. T-shank design for maximum grip and stability which fits 90% of all current jigsaw makes and models.
BBI 588463 Fully Threaded Machine Screw, #10-24, 2 in OAL, Round Head, Zinc CR+3 Plated, Phillips® Drive
BBI 588463 Fully Threaded Machine Screw, #10-24, 2 in OAL, Round Head, Zinc CR+3 Plated, Phillips® Drive
Sealmaster® gold ER bearings feature a cylindrical OD and snap ring for easy installation in a roll assembly. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Gardner Bender 20-163P Fully Insulated Bullet Disconnect, 16 to 14 AWG, 0.156 in Dia Bullet, Blue
The Gardner Bender quick and always reliable crimp-type wire terminals feature color-coded barrels denoting industry standard wire gauge sizes. Available in ring, spade, disconnect and bullet styles. Vinyl insulated barrels provide a high degree of protection and carry a maximum 600 V rating. Temperature ratings for the complete line are 75 deg C (167 deg F). You will find various terminals for various circuit protection devices, all insulated to last for those any environments. Gardner Bender terminals are leading the industry in quality and durability.
108X3/4" CARBON BANDSAW BLADE-MLF3/4X108X14T >
