Torrington 1-1/4"-ID NEEDLE BEARINGS TOR B-2012-OH
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
-
BrandKoyo
-
UPC605790197987
-
Manufacturer Part NumberB-2012-OH
-
CountryUSA
-
Load Capacity6490 lb Dynamic/14540 lb Static
-
Temperature Rating-30 to 110 deg C
-
Maximum Speed2300 rpm Grease/3500 rpm Oil
-
Closure TypeOpen
-
TypeOpen Ends Round Bore Uncaged
-
Width3/4 in
-
SeriesB Inch Series
-
Number of Rows1
-
Bearing MaterialSteel
-
Outside Diameter1-1/2 in
-
Bore Diameter1-1/4 in
- Full complement bearings handle high radial load carrying capability
- Best used to provide maximum radial load capacity (full complement of rollers, no cage) for thin cross section applications
- A hardened and machined shaft or an
- A press fit into the housing is required
-
UNSPSC31171512
-
Standards/ApprovalsABEC1|ASTM A1014|ANSI/ABMA 18.2
Recently Viewed
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Smith Bearing® YR-1-3/8-X Cylindrical Yoke Type Needle Bearing Cam Follower, 3/8 in Dia Bore, 1-3/8 in Dia x 3/4 in W Roller, 4470 lb Dynamic/8600 lb Static Load, 52100 Steel Roller
Yoke type needle roller bearings are recommended where running loads and shock loads are moderate. Manufactured from high alloy bearing quality steel.
Jones Stephens™ P70029 Replacement Blade, For Use With P70023 3 in Inside Pipe Cutter
3" X 1000' RED DANGER TAPE-UTCUT600RD1000 >
Browning® 1224583 Minimum Plain Bore Type C1 Change Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 50 Teeth, 5 in Dia Pitch, 1-1/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
