Koyo AXK3552 Metric Series Thrust Needle Roller and Cage Assembly, 35 mm Dia Bore, 52 mm OD, 2 mm W, 35 mm Dia Shaft, Steel
Thrust needle roller and cage assemblies are complements of small diameter needle rollers, arranged in a spoke-like configuration. Needle rollers are equally spaced by means of a cage, its web section separates the rollers and provides guidance to keep them tracking in an orbital path. The purpose of these assemblies is to transmit a thrust load between two relatively rotating objects while greatly reducing friction. Thrust needle roller and cage assemblies also can be unitized with lipped washers to serve as raceway surfaces for the needle rollers. Washers can be supplied separately or can be mechanically unitized to the thrust needle roller and cage assemblies for ease of handling.
-
BrandKoyo
-
UPC605790210853
-
Manufacturer Part NumberAXK3552
-
CountryUSA
-
Load Capacity17.4 kN Dynamic/79.5 kN Static
-
MaterialSteel
-
Maximum Speed8100 rpm Oil
-
TypeThrust
-
Width2 mm
-
SeriesAXK Metric Series
-
Outside Diameter52 mm
-
Bore Diameter35 mm
- One-way fool-proof assembly
- Anti-rotation locking
- Lubrication flow enhancements
- High-speed performance and application flexibility
-
Alternative Part NumberAXK3552PBL225
-
UNSPSC31171541
-
Standards/ApprovalsANSI/ABMA Standard 21.1|DIN 5405 Part 2
-
Catalog
Recently Viewed
Koyo AXK3552 Metric Series Thrust Needle Roller and Cage Assembly, 35 mm Dia Bore, 52 mm OD, 2 mm W, 35 mm Dia Shaft, Steel
Thrust needle roller and cage assemblies are complements of small diameter needle rollers, arranged in a spoke-like configuration. Needle rollers are equally spaced by means of a cage, its web section separates the rollers and provides guidance to keep them tracking in an orbital path. The purpose of these assemblies is to transmit a thrust load between two relatively rotating objects while greatly reducing friction. Thrust needle roller and cage assemblies also can be unitized with lipped washers to serve as raceway surfaces for the needle rollers. Washers can be supplied separately or can be mechanically unitized to the thrust needle roller and cage assemblies for ease of handling.
The Crosby G-213 1-1/4" is a heavy-duty, hot-dip galvanized carbon steel round pin anchor shackle. Part of the industry-recognized lineup from Kito Crosby, it is forged, quenched, and tempered with an alloy steel pin to handle demanding tie-down, towing, or overhead lifting applications. Key Specifications Working Load Limit (WLL): 12 tons (26,400 lbs). Design/Safety Factor: 6:1. Shackle Size (Body Thickness): 1-1/4 inches. Pin Diameter: 1.38 inches. Pin Type: Round pin with a cotter pin. Throat Width (Opening between ears): 2.03 inches. Throat Depth (Inside length): 4.69 inches.
Proto® J3050 Open End Wrench, 1-1/16 x 1-1/8 in Wrench, Angled/Double Head, 12-5/8 in L, Alloy Steel, Satin, ASME B107.100, ANSI B107.6, Federal GGG-W-636E
6-LB LEAD HAMMER WITH LONG STEEL HANDLE - COO121>
BRANDED SHIM IS CLEARLY MARKED WITH MATERIAL TYPE, MATERIAL THICKNESS AND LOT# FOR FULL TRACEABILITY. HALF HARD, COLD ROLLED, CDA 260 ALLOY
-PRC17240 >
5/16" X 36" O-1 OILHARD DRILLROD-DRI5/1601 >
