Female to Male Rod Ends
IKO Bearings 1/2" L/H ROD END BEARINGS IKO LHS-8-L
L-Balls are self-aligning Rod Ends that enable tilting, oscillation, low-torque rotation and smooth power transmission in a wide range of automated equipment.
IKO Bearings 1/2" ROD END BEARINGS IKO LHS-8
L-Balls are self-aligning Rod Ends that enable tilting, oscillation, low-torque rotation and smooth power transmission in a wide range of automated equipment.
IKO Bearings 3/4" ROD END BEARINGS IKO LHS-12
L-Balls are self-aligning Rod Ends that enable tilting, oscillation, low-torque rotation and smooth power transmission in a wide range of automated equipment.
IKO Bearings 3/8" ROD END BEARINGS IKO LHS-6
L-Balls are self-aligning Rod Ends that enable tilting, oscillation, low-torque rotation and smooth power transmission in a wide range of automated equipment.
IKO Bearings 3/8" ROD END BEARINGS IKO LHSA-6-L
L-Balls are self-aligning Rod Ends that enable tilting, oscillation, low-torque rotation and smooth power transmission in a wide range of automated equipment.
Recently Viewed
20-OZ LIE-FLAT RAYON SCREW MOPHEAD - IPT40120>
4" X 21-3/4" COARSE SANDING BELT-JWH339850 >
Gates® Power Transmission 10-IDL-BRAK Idler Bracket, For Use With 8 mm Pitch Idler Sprockets, 4.25 in OD Flat Idler Pulleys, 2012-Idl-Bush, 2517-Idl-Bush and 20-Idl-Bush Idler Bushing, 67.8 N-m Arm Bolt Torque, 17.6 N-m Set Screw Torque, 3/4-16 Threaded
Idlers are used to take-up extra belt length and provide adjustment for tensioning belt drives. Idler pulleys and sprockets can alter belt paths and clear obstructions.
15' 16/2 INDOOR CUBE TAP WHITE EXTENSION CORD - ECI09414 >
Square D™ Homeline™ HOM240GFI Class A Ground Fault Protecting Miniature Circuit Breaker, 120/240 V AC, 40 A, 10 kA Interrupt, 2 Poles, Thermal Magnetic Trip
Homeline miniature circuit breakers are engineered and designed for fast installation and superior circuit protection. Homeline circuit breakers are designed to plug into Homeline load centers to provide circuit protection. This circuit breaker provides standard circuit protection and is HACR rated. This 2 pole circuit breaker with plug in mounting is rated 40A at 120/240 VAC. HOM breakers provide 10 kA breaking capacity. This Homeline ground fault circuit breakers provide overload and short circuit protection, combined with Class A ground fault protection. Class A denotes a ground fault circuit interrupter that will trip when a fault current to ground is 6 milliamperes or more. The electrical connection is a clamp terminal that will accept 1 wires. The clamp terminal will accept a wire range of 14 AWG to 8 AWG copper or aluminum wire. HOM Homeline miniature circuit breakers are UL Listed.
Caged roller followers provide large internal grease storage capacity for applications where relubrication is infrequent. Cage guided rollers and a very heavy outer ring cross section permit operation at high loads and high speeds. Caged roller followers are avail able with and with out seals. The unsealed design provides the additional advantages of very low friction to prevent skidding in lightly loaded applications and provides for flow-through lubrication. Caged roller followers normally mount directly on a hardened and ground pin. RBC® offers a line of Precision Ground Inner Rings to simplify application of caged roller followers.
