ISOSTATIC™ Oilube® 202427 Round Bore Thrust Washer, 2 in ID x 3 in OD, 1/8 in THK, 10 to 175 deg F, SAE 841 Powdered Metal/Oil Impregnated Bronze
ISOSTATIC™ Oilube® 202427 Round Bore Thrust Washer, 2 in ID x 3 in OD, 1/8 in THK, 10 to 175 deg F, SAE 841 Powdered Metal/Oil Impregnated Bronze
-
BrandISOSTATIC™
-
UPC846802037017
-
Manufacturer Part Number202427
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Thickness1/8 in
-
MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sq-ft/min
-
TypeRound Bore
-
Inside Diameter2 in
-
Outside Diameter3 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberEW324802
-
UNSPSC31161814
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 202427 Round Bore Thrust Washer, 2 in ID x 3 in OD, 1/8 in THK, 10 to 175 deg F, SAE 841 Powdered Metal/Oil Impregnated Bronze
ISOSTATIC™ Oilube® 202427 Round Bore Thrust Washer, 2 in ID x 3 in OD, 1/8 in THK, 10 to 175 deg F, SAE 841 Powdered Metal/Oil Impregnated Bronze
RIDGID® 32920 Screw Feed Tubing Cutter, 3/16 to 1-1/8 in Nominal, Ergonomic Grip Handle
RIDGID® 32920 Screw Feed Tubing Cutter, 3/16 to 1-1/8 in Nominal, Ergonomic Grip Handle
Gates® Power Transmission Hi-Power® II PowerBand® 2/A42 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 44 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Gates® Power Transmission Hi-Power® II PowerBand® 2/A81 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 83 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Milwaukee® M18 FUEL™ 2766-20 Gen II High Torque Bare Tool Cordless Impact Wrench, 1/2 in 4-Mode Straight Drive, 2400 bpm, 750/1100 ft-lb Torque, 18 V DC, 9-3/4 in OAL
The 2766 M18 FUEL™ high torque 1/2 in. impact wrench with pin detent provides a full corded replacement delivering 750ft-lbs of fastening torque and 1100ft-lbs of nut-busting torque. The industry's most compact cordless high torque impact wrench at 8.1 in. in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL™ with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool includes a 1/2 in. pin detent anvil which provides superior socket retention. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
1-1/4" X 3" MD/HD OVAL DIE SPRINGS-LANSMHO1250300 >
