FED/Bronze 9/16" X 11/16" X 1" BRONZE BUSHING FEB CB-09-11-08
ISOSTATIC™ Century® 104095 Round Bore Sleeve Bearing, 9/16 in Dia Bore, 11/16 in OD, 1 in W
-
BrandISOSTATIC™
-
UPC846802014049
-
Manufacturer Part Number104095
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width1 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter11/16 in
-
Bore Diameter9/16 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-0911-08
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Century® 104095 Round Bore Sleeve Bearing, 9/16 in Dia Bore, 11/16 in OD, 1 in W
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Dichtomatik N70145 O-Ring, 145 Dash Number, 2.55 in ID x 2.756 in OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom 145
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
MARXMAN™ 85072 330QI General Purpose Jobber Length Drill Bit, #18 Drill - Wire, 0.1695 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
The Classic Series Material is the most popular in the Industry. It combines the strength and waterproof qualities of PVC with the durability of a polyester backing. The 200J yellow jacket features a snap front, take up snaps at the wrists,detachable hood with drawstring, and 2 front patch pockets. Come back to the Classics for your protective wear needs.
2-7/16" -ID Q-1-STYLE BUSHING
