ISOSTATIC™ Century® 104301 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1 in OD, 2 in W
ISOSTATIC™ Century® 104301 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1 in OD, 2 in W
-
BrandISOSTATIC™
-
UPC846802016104
-
Manufacturer Part Number104301
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width2 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter1 in
-
Bore Diameter7/8 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-1416-16
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Century® 104301 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1 in OD, 2 in W
ISOSTATIC™ Century® 104301 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1 in OD, 2 in W
Weiler® 06120 TLM-8 Medium Face Wheel Brush, 8 in Dia Brush, 1 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 2 in Arbor Hole
Weiler® 06120 TLM-8 Medium Face Wheel Brush, 8 in Dia Brush, 1 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 2 in Arbor Hole
Power Team® P300 2-Speed Single Acting Hand Pump, 1.5 gal Tank, 310 cu-in Pump
Power Team® hand pumps, with the angled fill port, have a built in "relief valve" protection system. This system is designed to protect over pressurization of the reservoir from sudden back pressure. This system also works as a seal to prevent oil leaks.
FYH® SA206 30MMFP7 SA Series Narrow Inner Ring Bearing Pillow Block Unit, 1-1/4 in Dia Bore, 1.18 in W, 19.5 kN Dynamic/11.3 kN Static Load
FYH® SA206 30MMFP7 SA Series Narrow Inner Ring Bearing Pillow Block Unit, 1-1/4 in Dia Bore, 1.18 in W, 19.5 kN Dynamic/11.3 kN Static Load
21" WINDSHIELD WIPER BLADE
Greenlee® 645-3 Quick-Change Hole Cutter, 3 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor
Greenlee® 645-3 Quick-Change Hole Cutter, 3 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor
