ISOSTATIC™ Century® 104324 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 3 in W
ISOSTATIC™ Century® 104324 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 3 in W
-
BrandISOSTATIC™
-
UPC846802016333
-
Manufacturer Part Number104324
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width3 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter1-1/8 in
-
Bore Diameter7/8 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-1418-24
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Century® 104324 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 3 in W
ISOSTATIC™ Century® 104324 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 3 in W
Starrett® 91C 91 Series Tap Wrench, 1/4 to 5/8 in Tap, Non-Ratcheting, Tool Steel, 12 in L, Bar Handle
The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 12" (300mm) Length, 1/4-5/8" (4.7-16mm) Tap Size.
Browning® 767578 VS 100 Intermediate Duty Straight Bore Ball Bearing Insert, 1-3/16 in Dia Bore, 2.4409 in OD, 1-5/32 in W, 4381 lb Dynamic/2567 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
BBI 400448 Partially Threaded Cap Screw, 5/8-11, 4-1/2 in L Under Head, A2 (18-8) Grade, Stainless Steel
BBI 400448 Partially Threaded Cap Screw, 5/8-11, 4-1/2 in L Under Head, A2 (18-8) Grade, Stainless Steel
BBI 400504 Fully Threaded Cap Screw, 3/4-10, 1-1/2 in L Under Head, A2 (18-8) Grade, Stainless Steel
BBI 400504 Fully Threaded Cap Screw, 3/4-10, 1-1/2 in L Under Head, A2 (18-8) Grade, Stainless Steel
Browning® 767980 VE Series Light Duty Straight Bore Ball Bearing Insert, 1-3/4 in Dia Bore, 3.347 in OD, 1.766 in W, 7901 lb Dynamic/5139 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
