ISOSTATIC™ Oilube® 401289 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 1-3/8 in W
ISOSTATIC™ Oilube® 401289 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 1-3/8 in W
-
BrandISOSTATIC™
-
UPC846802045845
-
Manufacturer Part Number401289
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1-3/8 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter1-1/8 in
-
Bore Diameter7/8 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-2836-22
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 401289 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 1-3/8 in W
ISOSTATIC™ Oilube® 401289 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 1-3/8 in W
Proto® J4917MCF Crowfoot Wrench, 17 mm Wrench, 3/8 in Drive, 1-23/32 in OAL, ASME B107.21, Full Polished
Proto® J4917MCF Crowfoot Wrench, 17 mm Wrench, 3/8 in Drive, 1-23/32 in OAL, ASME B107.21, Full Polished
MasterDrive L050U L050 General Duty Jaw Coupling Spider and Element, 1.72 in L, 4.75 in OD, Polyurethane
Jaw Couplings provide standard shaft-to-shaft connection for general duty applications. Two hubs are used in pair with an element (spider), each sold seperately. The element eliminates metal-to-metal contact and acts as a shock absorber. The design is fail-safe in that it will perform if the element fails. These Urethane elements provide good corrosion resistiance with good flexibility and misalignment.
Sealmaster® 700078 Medium Duty Non-Expansion Straight Bore Ball Bearing Insert, 1-3/4 in Dia Bore, 3.5433 in OD, 2-1/32 in W, 7889 lb Dynamic/5216 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
IKO LBB12 Inch Series Standard Linear Bushing, 3/4 in Dia Shaft, 1-1/4 in OD, 1-5/8 in L
IKO LBB12 Inch Series Standard Linear Bushing, 3/4 in Dia Shaft, 1-1/4 in OD, 1-5/8 in L
1-1/2" X 1-1/2" X 1/8" X 240" ANGLE IRON-JMS11/2X11/2X1/8 >
