ISOSTATIC™ Oilube® 401115 Round Bore Sleeve Bearing, 7/16 in Dia Bore, 5/8 in OD, 7/8 in W
ISOSTATIC™ Oilube® 401115 Round Bore Sleeve Bearing, 7/16 in Dia Bore, 5/8 in OD, 7/8 in W
-
BrandISOSTATIC™
-
UPC846802044107
-
Manufacturer Part Number401115
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width7/8 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter5/8 in
-
Bore Diameter7/16 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-1420-14
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 401115 Round Bore Sleeve Bearing, 7/16 in Dia Bore, 5/8 in OD, 7/8 in W
ISOSTATIC™ Oilube® 401115 Round Bore Sleeve Bearing, 7/16 in Dia Bore, 5/8 in OD, 7/8 in W
48" X 22-GAUGE BENCH HAND BRAKE
INS-DLM-200 Dodge® 128661 211 Medium Duty Ball Insert Bearing, 2 in Dia Bore, 3.937 in OD, 2-1/4 in W, 9755 lb Dynamic/6588 lb Static Load
INS-DLM-200 Dodge® 128661 211 Medium Duty Ball Insert Bearing, 2 in Dia Bore, 3.937 in OD, 2-1/4 in W, 9755 lb Dynamic/6588 lb Static Load
Sealmaster® 700007 Non-Expansion Standard Duty Straight Bore Ball Bearing Insert, 5/8 in Dia Bore, 1.8504 in OD, 1-7/32 in W, 2611 lb Dynamic/1444 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
ISOSTATIC™ Oilube® 401111 Round Bore Sleeve Bearing, 7/16 in Dia Bore, 5/8 in OD, 3/8 in W
ISOSTATIC™ Oilube® 401111 Round Bore Sleeve Bearing, 7/16 in Dia Bore, 5/8 in OD, 3/8 in W
ITM C63NC0004 Plug Tap, 4-40 NC Thread, H2 Thread Limit
