ISOSTATIC™ Oilube® 101344 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 7/8 in OD, 2 in W
ISOSTATIC™ Oilube® 101344 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 7/8 in OD, 2 in W
-
BrandISOSTATIC™
-
UPC846802003449
-
Manufacturer Part Number101344
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width2 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter7/8 in
-
Bore Diameter5/8 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberAA-832-18
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 101344 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 7/8 in OD, 2 in W
ISOSTATIC™ Oilube® 101344 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 7/8 in OD, 2 in W
The Littelfuse® LGR and LMF series fuses and LHR holder offer increased safety and reliability to lighting systems. on a 277 volt system, a fault occurring in an un-fused fixture could take out the entire branch circuit affecting upto 100 fixtures. this could cause safety problems as well as shut down operations. by individually fusing fixtures, these problems will be avoided. The added benefits of this is the ability to quickly identify the problem fixture and reduce the repair time. fuse holders are rated upto 10 A at 300 V and are equipped with 7 18 AWG leads. Order part number LHR 000 for two leads and part number LHR 001 for one lead and one terminal for insertion of 18 AWG ballast lead.
8_100x100.png){kind=logo}
48" SHELVING SWAY BACK BRACES-HLW951055>
14-VOLT 1-3/4 .80-AMP MINI BULBS
1/2"-ID JAW COUPLING HALFS-LOVL095X1/2>
Jones Stephens™ B91150 1-Piece Quarter-Turn Ball Valve, 1-1/2 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
Jones Stephens™ B91150 1-Piece Quarter-Turn Ball Valve, 1-1/2 in Nominal, Thread End Style, PVC Body, Standard Port, EPDM Softgoods
