FED/Bronze 3-7/16X3-15/16X4-1/2 BRONZEBUSHING FEB CB-55-63-36
ISOSTATIC™ Century® 104989 Round Bore Sleeve Bearing, 3-7/16 in Dia Bore, 3-15/16 in OD, 4-1/2 in W
-
BrandISOSTATIC™
-
UPC846802022983
-
Manufacturer Part Number104989
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width4-1/2 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter3-15/16 in
-
Bore Diameter3-7/16 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-5563-36
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
FED/Bronze 3-7/16X3-15/16X4-1/2 BRONZEBUSHING FEB CB-55-63-36
ISOSTATIC™ Century® 104989 Round Bore Sleeve Bearing, 3-7/16 in Dia Bore, 3-15/16 in OD, 4-1/2 in W
WOOD-HANDLED WELDED BOW RAKES-TRU33038 >
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
1215-7/8 7/8"-ID 1215-style Taper-lock Bushing
7/8"-ID 1215-STYLE TAPER-LOCK BUSHING - IDC12157/8>
1" -ID NEEDLE BEARING-IKOBHA1624 >
BANDED V-BELT-JAS6R3VX335>
