ISOSTATIC™ Century® 104207 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 7/8 in OD, 3/4 in W
ISOSTATIC™ Century® 104207 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 7/8 in OD, 3/4 in W
-
BrandISOSTATIC™
-
UPC846802015169
-
Manufacturer Part Number104207
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width3/4 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter7/8 in
-
Bore Diameter3/4 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-1214-06
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Century® 104207 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 7/8 in OD, 3/4 in W
ISOSTATIC™ Century® 104207 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 7/8 in OD, 3/4 in W
The D6224-2 two section fiberglass extension ladder has non-conductive rails making this ladder Ideal for working near electricity. With a duty rating of 300 pounds, the D6224-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D-rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.
Working Load Limit (WLL): 25 Metric Tons (55,000 lbs). Design/Safety Factor: 6:1 structural safety margin. Material: Forged carbon steel body with a quenched and tempered alloy pin. Finish: Self-Colored (un-galvanized/painted or natural steel finish indicated by the "S" prefix). Pin Style: Thin hex-head bolt with a nut and cotter pin securement. Approximate Weight: 31.4 lbs (14.2 kg
5/16" DIAMETERX1-1/4" DOWEL PIN-HOL01072 >
Weller® 7135N Standard Soldering Tip With Hex Nut, For Use With 8200 and 9200 Universal Soldering Guns, 4.19 mm OD x 22.48 mm L, Copper
Weller® 7135N Standard Soldering Tip With Hex Nut, For Use With 8200 and 9200 Universal Soldering Guns, 4.19 mm OD x 22.48 mm L, Copper
BBI 455588 Partially Threaded Cap Screw, 7/8-9, 3 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455588 Partially Threaded Cap Screw, 7/8-9, 3 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
