ISOSTATIC™ Oilube® 401226 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 7/8 in OD, 3/4 in W
ISOSTATIC™ Oilube® 401226 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 7/8 in OD, 3/4 in W
-
BrandISOSTATIC™
-
UPC846802045210
-
Manufacturer Part Number401226
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width3/4 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter7/8 in
-
Bore Diameter3/4 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-2428-12
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 401226 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 7/8 in OD, 3/4 in W
ISOSTATIC™ Oilube® 401226 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 7/8 in OD, 3/4 in W
BBI 400008 Fully Threaded Cap Screw, 1/4-20, 7/8 in L Under Head, A2 (18-8) Grade, Stainless Steel
BBI 400008 Fully Threaded Cap Screw, 1/4-20, 7/8 in L Under Head, A2 (18-8) Grade, Stainless Steel
BBI 400510 Fully Threaded Cap Screw, 3/4-10, 2-1/4 in L Under Head, A2 (18-8) Grade, Stainless Steel
BBI 400510 Fully Threaded Cap Screw, 3/4-10, 2-1/4 in L Under Head, A2 (18-8) Grade, Stainless Steel
Dichtomatik N70148 O-Ring, 148 Dash Number, 2.737 in ID x 2.943 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
3" 130-VOLT CLEAR TRAFFIC BULBS-BUL116A21TS >
#10 X 1-1/4" Flat Head Slotted Wood Screw
