FED/Bronze 3/4" X 1-1/8" X 1-1/2" BRZ/BUSHING FEB SS-24-36-24
ISOSTATIC™ Oilube® 401260 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1-1/8 in OD, 1-1/2 in W
-
BrandISOSTATIC™
-
UPC846802045555
-
Manufacturer Part Number401260
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1-1/2 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter1-1/8 in
-
Bore Diameter3/4 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-2436-24
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 401260 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1-1/8 in OD, 1-1/2 in W
24-OZ DEAD BLOW BALL PEIN HAMMER -ARS68524 >
RIDGID® 31705 Coil and Flat Spring Assembly, For Use With 24 in Straight Pipe Wrench
RIDGID® 31705 Coil and Flat Spring Assembly, For Use With 24 in Straight Pipe Wrench
607-008-0150 8-32" X 1-1/2" USS Stainless Steel Flat Head Socket Head Capscrew
8-32" X 1-1/2" USS Stainless Steel Flat Head Socket Head Capscrew
Milwaukee® 48-25-1122 Standard Drill Bit, 1-1/8 in Dia, 6 in OAL, 7/16 in Shank
Milwaukee® Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. Two feed screws are included.
3/4" -MALE PIPE THREADX48 REDI-CUT GALVANIZED PIPE NIPPLE. BOTH ENDS THREADED AND WITH THREAD PROTECTOR-JWH424366 >
