ISOSTATIC™ Oilube® 401264 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1-1/4 in OD, 1 in W
ISOSTATIC™ Oilube® 401264 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1-1/4 in OD, 1 in W
-
BrandISOSTATIC™
-
UPC846802045593
-
Manufacturer Part Number401264
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter1-1/4 in
-
Bore Diameter3/4 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-2440-16
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 401264 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1-1/4 in OD, 1 in W
ISOSTATIC™ Oilube® 401264 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1-1/4 in OD, 1 in W
BBI 400424 Fully Threaded Cap Screw, 5/8-11, 1 in L Under Head, A2 (18-8) Grade, Stainless Steel
BBI 400424 Fully Threaded Cap Screw, 5/8-11, 1 in L Under Head, A2 (18-8) Grade, Stainless Steel
BRASS SHIM STOCK-OHSCBS15 >
ISOSTATIC™ Century® 104324 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 3 in W
ISOSTATIC™ Century® 104324 Round Bore Sleeve Bearing, 7/8 in Dia Bore, 1-1/8 in OD, 3 in W
Starrett® 91C 91 Series Tap Wrench, 1/4 to 5/8 in Tap, Non-Ratcheting, Tool Steel, 12 in L, Bar Handle
The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 12" (300mm) Length, 1/4-5/8" (4.7-16mm) Tap Size.
Browning® 767578 VS 100 Intermediate Duty Straight Bore Ball Bearing Insert, 1-3/16 in Dia Bore, 2.4409 in OD, 1-5/32 in W, 4381 lb Dynamic/2567 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
