ISOSTATIC™ Oilube® 401532 Round Bore Sleeve Bearing, 2 in Dia Bore, 2-1/2 in OD, 1-1/2 in W
ISOSTATIC™ Oilube® 401532 Round Bore Sleeve Bearing, 2 in Dia Bore, 2-1/2 in OD, 1-1/2 in W
-
BrandISOSTATIC™
-
UPC846802048266
-
Manufacturer Part Number401532
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1-1/2 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter2-1/2 in
-
Bore Diameter2 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-6480-24
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 401532 Round Bore Sleeve Bearing, 2 in Dia Bore, 2-1/2 in OD, 1-1/2 in W
ISOSTATIC™ Oilube® 401532 Round Bore Sleeve Bearing, 2 in Dia Bore, 2-1/2 in OD, 1-1/2 in W
Proto® J406 Deep Throat Standard Duty C-Clamp, 3-5/8 in D Throat, 6 in Clamping, 0 to 6 in Jaw Opening, 3/4 in Screw
Starrett® 78XTZ-750 78XT Global Series® Mechanical Bore Gage, 5/8 to 3/4 in, Graduations: 0.00025 in, 2-7/16 in D Probe, Tungsten Carbide
The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact points seat the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12" (1-300mm). 5/8-3/4" Range, w/3 Point Carbide Contact.
10-LBS BLUE HUCK LOW LINT RAGS-STEHUCK10>
#10 X 3/4" Stainless Steel Oval Head Phillips Sheet Metal Screw
Hougen® 12156 12000 Annular Cutter, 1-3/4 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
