FED/Bronze 25 X 30 X 20 METRIC BRONZE BUSHING FEB AM-2530-20
ISOSTATIC™ Oilube® 601364 Round Bore Sleeve Bearing, 25 mm Dia Bore, 30 mm OD, 20 mm W
-
BrandISOSTATIC™
-
UPC846802062064
-
Manufacturer Part Number601364
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width20 mm
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter30 mm
-
Bore Diameter25 mm
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberAM-2530-20
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 601364 Round Bore Sleeve Bearing, 25 mm Dia Bore, 30 mm OD, 20 mm W
Browning 22-TOOTH #60-2-CHAIN DBL/SPROCKETS BRW D-60-Q-22
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
Milton 691 1/4"-FPT STRAIGHT HEAD AIR CHUCKS 1/4" female national pipe thread Maximum air pressure of 150 pounds per square inch Closed/sealing type air chuck
These 1/4 in FNPT straight head air Chucks are designed and manufactured to exacting standards. These closed or sealing type Chucks offer a maximum air pressure of 150 psi. These are not for use with an inflator/pressure gauge.
45 TOOTH SPROCKETS FOR #50 CHAIN
MORSE® 58170 5955 Center Cutting Long Length Single End End Mill, 5/8 in Dia Cutter, 2-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 5 in OAL, Bright
Gates® Power Transmission Super HC® Molded Notch PowerBand® 4/3VX1250 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 125 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
