ISOSTATIC™ Century® 104933 Round Bore Sleeve Bearing, 2-1/2 in Dia Bore, 3-1/4 in OD, 4 in W
ISOSTATIC™ Century® 104933 Round Bore Sleeve Bearing, 2-1/2 in Dia Bore, 3-1/4 in OD, 4 in W
-
BrandISOSTATIC™
-
UPC846802022426
-
Manufacturer Part Number104933
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width4 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter3-1/4 in
-
Bore Diameter2-1/2 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-4052-32
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Century® 104933 Round Bore Sleeve Bearing, 2-1/2 in Dia Bore, 3-1/4 in OD, 4 in W
ISOSTATIC™ Century® 104933 Round Bore Sleeve Bearing, 2-1/2 in Dia Bore, 3-1/4 in OD, 4 in W
Browning® 767690 VS 200 Standard-Duty Straight Bore Ball Bearing Insert, 1-3/4 in Dia Bore, 3.3465 in OD, 1-15/16 in W, 7901 lb Dynamic/5139 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
5/16" DIAMETERX2-1/4" SOCKET HEAD CAP SCREWS-HOL72138 >
Dichtomatik N4.00X096 O-Ring, 96 mm ID x 104 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
ISOSTATIC™ Oilube® 101228 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 11/16 in OD, 1-1/8 in W
ISOSTATIC™ Oilube® 101228 Round Bore Sleeve Bearing, 1/2 in Dia Bore, 11/16 in OD, 1-1/8 in W
ISOSTATIC™ Oilube® 101344 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 7/8 in OD, 2 in W
ISOSTATIC™ Oilube® 101344 Round Bore Sleeve Bearing, 5/8 in Dia Bore, 7/8 in OD, 2 in W
