FED/Bronze 1" X 1-3/8" X 2" BRONZE BUSHINGS FEB SS-32-44-32
ISOSTATIC™ Oilube® 401348 Round Bore Sleeve Bearing, 1 in Dia Bore, 1-3/8 in OD, 2 in W
-
BrandISOSTATIC™
-
UPC846802046439
-
Manufacturer Part Number401348
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width2 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter1-3/8 in
-
Bore Diameter1 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-3244-32
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 401348 Round Bore Sleeve Bearing, 1 in Dia Bore, 1-3/8 in OD, 2 in W
PROJECTOR BULBS
STEEL SHIM STOCK-OHSCRS12 >
BBI 581405 1960 Semi-Standard Round Socket Cap Screw, 1/4-28, 3 in OAL, Alloy Steel, 3A Grade
BBI 581405 1960 Semi-Standard Round Socket Cap Screw, 1/4-28, 3 in OAL, Alloy Steel, 3A Grade
Morse® 116206 MHSA Advanced Hole Saw With Arbor, 1-1/4 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 5/8-18 Arbor
The all new advanced bi-metal hole saw by M.K. Morse®. Our latest sawing innovation replaces all current Morse bi-metal hole saw solutions into one, simple optimized powerhouse.
Remke Tuff-Seal™ 7303-002R Closed Mesh Non-Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 0.3 to 0.43 in Cable, For Use With 1/2 in NPT Connector, Aluminum
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
