ISOSTATIC™ Oilube® 401439 Round Bore Sleeve Bearing, 1-3/8 in Dia Bore, 1-5/8 in OD, 2 in W
ISOSTATIC™ Oilube® 401439 Round Bore Sleeve Bearing, 1-3/8 in Dia Bore, 1-5/8 in OD, 2 in W
-
BrandISOSTATIC™
-
UPC846802047337
-
Manufacturer Part Number401439
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width2 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter1-5/8 in
-
Bore Diameter1-3/8 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-4452-32
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 401439 Round Bore Sleeve Bearing, 1-3/8 in Dia Bore, 1-5/8 in OD, 2 in W
ISOSTATIC™ Oilube® 401439 Round Bore Sleeve Bearing, 1-3/8 in Dia Bore, 1-5/8 in OD, 2 in W
8 AWG CORD FEATURES THREE STRANDED VARE COPPER CONDUCTORS, EPDM INSULATION, AND A TPE JACKET. IT IS VERY FLEXIBLE AND ADAPTABLE. THIS PORTABLE POWER CABLE IS IDEAL FOR WIRING IN APPLIANCES, TOOLS, AND TEMPORARY POWER OR LIGHTING.
-ALE8/3SO >
8-foot (96-inch) linear T8 fluorescent tube that produces a 5000K daylight color temperature with a high color rendering
Sealmaster® 701073 ER Series Non-Expansion Standard Duty Straight Bore Ball Bearing Insert With Snap Ring, 1-3/4 in Dia Bore, 3.3465 in OD, 1 Rows, 1-15/16 in W, 7901 lb Dynamic/5139 lb Static Load
Sealmaster® gold ER bearings feature a cylindrical OD and snap ring for easy installation in a roll assembly. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Sealmaster® 700091 Medium Duty Non-Expansion Straight Bore Ball Bearing Insert, 2-15/16 in Dia Bore, 5.1181 in OD, 3-1/16 in W, 17412 lb Dynamic/13174 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Browning® 765811 VPS 200 Normal Duty Pillow Block Ball Bearing, 1-7/16 in Dia Bore, 4-9/16 to 5-7/16 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-3/4 in OAL x 3-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
