FED/Bronze 1-15/16"X2-3/8"X3" BRONZE BUSHINGS FEB CB-31-38-24
ISOSTATIC™ Century® 104830 Round Bore Sleeve Bearing, 1-15/16 in Dia Bore, 2-3/8 in OD, 3 in W
-
BrandISOSTATIC™
-
UPC846802021399
-
Manufacturer Part Number104830
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width3 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter2-3/8 in
-
Bore Diameter1-15/16 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-3138-24
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
FED/Bronze 1-15/16"X2-3/8"X3" BRONZE BUSHINGS FEB CB-31-38-24
ISOSTATIC™ Century® 104830 Round Bore Sleeve Bearing, 1-15/16 in Dia Bore, 2-3/8 in OD, 3 in W
DOUBLE ROW BALL BEARINGS WSR-GEN455511>
15/16" -ID 1215-STYLE TAPER-LOCK BUSHING-BRW1215X15/16 >
BBI 711030 Semi-Standard Shoulder Screw, Round Head, Alloy Steel, 1/4 in Dia x 2-3/4 in L Shoulder, #10-24
BBI 711030 Semi-Standard Shoulder Screw, Round Head, Alloy Steel, 1/4 in Dia x 2-3/4 in L Shoulder, #10-24
Dichtomatik N70354 O-Ring, 354 Dash Number, 5.1 in ID x 5.52 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
