ISOSTATIC™ Century® 104472 Round Bore Sleeve Bearing, 1-1/8 in Dia Bore, 1-3/8 in OD, 3 in W
ISOSTATIC™ Century® 104472 Round Bore Sleeve Bearing, 1-1/8 in Dia Bore, 1-3/8 in OD, 3 in W
-
BrandISOSTATIC™
-
UPC846802017811
-
Manufacturer Part Number104472
-
CountryUSA
-
Temperature Rating-40 to 450 deg F
-
Maximum PV Rating75000 psi/sq-ft/min
-
Maximum Pressure3000 psi
-
Maximum Velocity750 sfpm
-
TypeRound Bore
-
Width3 in
-
Bearing MaterialSAE 660 Cast Bronze
-
Outside Diameter1-3/8 in
-
Bore Diameter1-1/8 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberCB-1822-24
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Century® 104472 Round Bore Sleeve Bearing, 1-1/8 in Dia Bore, 1-3/8 in OD, 3 in W
ISOSTATIC™ Century® 104472 Round Bore Sleeve Bearing, 1-1/8 in Dia Bore, 1-3/8 in OD, 3 in W
MORSE® 22368 1655M Chucking Reamer, 10 mm Dia x 7 in OAL, 0.3105 in Dia Straight Shank, Straight Flute
MORSE® 22368 1655M Chucking Reamer, 10 mm Dia x 7 in OAL, 0.3105 in Dia Straight Shank, Straight Flute
MORSE® 91114 5942G Ball Nose Center Cutting Regular Length Single End End Mill, 3/8 in Dia Cutter, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, TiN Coated
MORSE® 91114 5942G Ball Nose Center Cutting Regular Length Single End End Mill, 3/8 in Dia Cutter, 7/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 2-1/2 in OAL, TiN Coated
Thomson® W1250 External Type W Retaining Ring, 1-1/4 in Dia Shaft, 2.49 in OD, Steel
External retaining rings fit into the retaining ring grooves on the outside diameter of super smart, super and Precision Steel Ball Bushing® bearings to provide external mounting retention. Available in standard and stainless steel versions.
Littelfuse® POWR-GARD® LFR60060-1CID Indicating Fuse Block, 600 V AC, 60 A, Class: R, 250 kcmil Wire, 1 Poles
The new Littelfuse® class H and R blocks offer many advantages over previous generations that are noted in the features and benefits section. Class H and class R fuse blocks are dimensionally the same, but class R blocks incorporate A rejection feature, which only allows class R fuses to be inserted.
ISOSTATIC™ Century® 104710 Round Bore Sleeve Bearing, 1-1/2 in Dia Bore, 2 in OD, 4 in W
ISOSTATIC™ Century® 104710 Round Bore Sleeve Bearing, 1-1/2 in Dia Bore, 2 in OD, 4 in W
