ISOSTATIC™ Oilube® 401401 Round Bore Sleeve Bearing, 1-1/4 in Dia Bore, 1-1/2 in OD, 1-1/4 in W
ISOSTATIC™ Oilube® 401401 Round Bore Sleeve Bearing, 1-1/4 in Dia Bore, 1-1/2 in OD, 1-1/4 in W
-
BrandISOSTATIC™
-
UPC846802046965
-
Manufacturer Part Number401401
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1-1/4 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter1-1/2 in
-
Bore Diameter1-1/4 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-4048-20
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 401401 Round Bore Sleeve Bearing, 1-1/4 in Dia Bore, 1-1/2 in OD, 1-1/4 in W
ISOSTATIC™ Oilube® 401401 Round Bore Sleeve Bearing, 1-1/4 in Dia Bore, 1-1/2 in OD, 1-1/4 in W
4-1/2" 80-GRIT ZIRCONIUM FLAP DISCS-WEI50515 >
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Loctite® 135514 620™ High Temperature Retaining Compound, 50 mL Bottle, Liquid, Green, 1.1599999999999999
LOCTITE® 620™ retaining compound high temperature is recommended for high temperature retaining of parts with a clearance or interference fit, i.e., retaining bushings, bearings, seals, fans and liners. Requires heat cure to achieve temperature resistance
The D1508-1 is an 8 ft one section aluminum straight ladder with a duty rating of 300 lb. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. The side rails are extra heavy duty I-Beam rails and the aluminum TRACTION-TRED® D-rungs are slip resistant. The rugged shoe rests flat or is held in spur position with the SHU-LOK® feature for use on hard or penetrable surfaces.
All Reed cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, Reed cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only Reed cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make Reed cutter wheels resist breakage and last longer.
