FED/Bronze 1-1/2" X 2" X 3" BRONZE BUSHING FEB SS-48-64-48
ISOSTATIC™ Oilube® 401483 Round Bore Sleeve Bearing, 1-1/2 in Dia Bore, 2 in OD, 3 in W
-
BrandISOSTATIC™
-
UPC846802047771
-
Manufacturer Part Number401483
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width3 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter2 in
-
Bore Diameter1-1/2 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-4864-48
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 401483 Round Bore Sleeve Bearing, 1-1/2 in Dia Bore, 2 in OD, 3 in W
1/2-13" X 9/16"-PDTSG60409 >
Jones 81 Extension Spring, 0.38 in ID x 0.562 in OD, 3-1/4 in OAL, Steel
Milton 1838 3/8" FNPT H style plugs are made of case hardened steel and are plated to resist rust. Milton H style plugs have a 3/8" basic flow size and a maximum pressure of 300 PSI. With air flow of up to 67 SCFM, H style couplers and plugs are perfect
3/8 in FNPT H-style Plugs are made of case hardened steel and are plated to resist rust. Milton® H-style Plugs have a 3/8 in basic flow size and a maximum pressure of 300 psi. With air flow of up to 67 scfm, H-style couplers and Plugs are perfect for larger tool applications that require more scfm.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
Wear protection products extend the life of slings by reducing exposure to abrasion and other similar forms of sling damage. Wear pads also help protect load surfaces from damage along points of contact.
