FED/Bronze 1-1/2"X1-3/4"X2-1/2"BRONZE BUSHING FEB SS-48-56-40
ISOSTATIC™ Oilube® 401467 Round Bore Sleeve Bearing, 1-1/2 in Dia Bore, 1-3/4 in OD, 2-1/2 in W
-
BrandISOSTATIC™
-
UPC846802047610
-
Manufacturer Part Number401467
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width2-1/2 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter1-3/4 in
-
Bore Diameter1-1/2 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSS-4856-40
-
UNSPSC31171509
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
FED/Bronze 1-1/2"X1-3/4"X2-1/2"BRONZE BUSHING FEB SS-48-56-40
ISOSTATIC™ Oilube® 401467 Round Bore Sleeve Bearing, 1-1/2 in Dia Bore, 1-3/4 in OD, 2-1/2 in W
1" X 1-1/2" HD OVAL DIE SPRINGS-LANSHDO1000150 >
G.L.HUYETT™ LP-312-2062 Imperial Lynch Pin, 5/16 in Dia, 2-1/16 in L Usable, Carbon Steel, Zinc Yellow
G.L.HUYETT™ LP-312-2062 Imperial Lynch Pin, 5/16 in Dia, 2-1/16 in L Usable, Carbon Steel, Zinc Yellow
HCI Preferred Supplier 46002 Needle Valve, 1/4 x 1/8 in, Compression x Male, Brass Body
HCI Preferred Supplier 46002 Needle Valve, 1/4 x 1/8 in, Compression x Male, Brass Body
Koyo M88010 Type-TS Cup, 2-11/16 in OD, 11/16 in W Cup, 7/8 in W Bearing, 0.06 in Max House Fillet Radius
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
