ISOSTATIC™ Oilube® 302050 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 5/8 in W, 1 in Dia Flange
ISOSTATIC™ Oilube® 302050 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 5/8 in W, 1 in Dia Flange
-
BrandISOSTATIC™
-
UPC846802042127
-
Manufacturer Part Number302050
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Flange Diameter1 in
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width5/8 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter3/4 in
-
Bore Diameter5/8 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberFB-1012-5
-
UNSPSC31171501
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 302050 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 5/8 in W, 1 in Dia Flange
ISOSTATIC™ Oilube® 302050 Round Bore Flange Bearing, 5/8 in Dia Bore, 3/4 in OD, 5/8 in W, 1 in Dia Flange
Sealmaster 2-7/16"-ID 4-BOLT TRB PILLOW BLOCK SEA RPB-207-4
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
Gates® Power Transmission PowerGrip® 450H075 Heavy Timing Belt, 3/4 in W, 45 in OAL, 1/2 in Pitch, 90 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
WHITE TAMPICO ROOFING BRUSH (HEAD ONLY) - MAG7324 >
Bando Power King® SPB2500 Classical V-Belt, SPB Section, 16 mm W Top, 2500 mm L Outside, 13.5 mm THK, Banprene® Impregnated Fabric
In addition to belts manufactured to ARPM (Association for Rubber Products Manufacturers) standards, Bando produces belts to European standard DIN 7753 and ISO4184. These standards are based on the metric system of measure and have different cross section designations. The Narrow Wedge profile allows for higher speed ratios, shorter center distances, and more compact drives. They are direct replacements for belts on imported machinery and on domestic equipment for export.
Rust-Oleum® 266041 ROC-Prime 100 Water Based Hybrid Epoxy Primer, 5 gal Container, Liquid Form, Gray, 225 to 375 sq-ft/gal Coverage
