ISOSTATIC™ Oilube® 402049 Round Bore Flange Bearing, 1/2 in Dia Bore, 5/8 in OD, 1 in W, 7/8 in Dia Flange
ISOSTATIC™ Oilube® 402049 Round Bore Flange Bearing, 1/2 in Dia Bore, 5/8 in OD, 1 in W, 7/8 in Dia Flange
-
BrandISOSTATIC™
-
UPC846802049195
-
Manufacturer Part Number402049
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Flange Diameter7/8 in
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width1 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter5/8 in
-
Bore Diameter1/2 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberSF-1620-16
-
UNSPSC31171501
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Catalog
-
Specification Sheet
Recently Viewed
ISOSTATIC™ Oilube® 402049 Round Bore Flange Bearing, 1/2 in Dia Bore, 5/8 in OD, 1 in W, 7/8 in Dia Flange
ISOSTATIC™ Oilube® 402049 Round Bore Flange Bearing, 1/2 in Dia Bore, 5/8 in OD, 1 in W, 7/8 in Dia Flange
OCCUPANCY SENSOR SWITCH-JWH501311>
3/8" X 3/8" USS SOCKET SET SCREW-NBS7190380038BP >
IKO IRB1216 Inch Series Inner Ring, 3/4 in ID x 1 in OD, 25.78 mm OAW, For Use With BA1616Z/BHA1616Z and YB1616 Shell Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. These rings are designed to provide a durable surface for shell-type needle roller bearings with non-machined raceways in-type IRB series shaft diameters range from 5/16 to 2-1/2 in.
Selecta started in 1976 with its own great brand of secondary products, Selecta source these secondary products but we packaged the products in easy-to-sell bags.
ASC-131 Setscrew Collar, 1-Piece Solid Construction, 1-5/16 in ID x 2-1/8 in OD x 11/16 in W, Steel
Zinc Plated Steel Set Screw Collar. Traditional cost effective collar design.
