Bunting BRG 3/4X1/2X7/8 BRONZE FLANGE BEARING FEB FFB-8-12-7
ISOSTATIC™ Oilube® 302044 Round Bore Flange Bearing, 1/2 in Dia Bore, 3/4 in OD, 7/8 in W, 1 in Dia Flange
-
BrandISOSTATIC™
-
UPC846802042066
-
Manufacturer Part Number302044
-
CountryUSA
-
Temperature Rating10 to 175 deg F
-
Flange Diameter1 in
-
Maximum PV Rating50000 psi/sq-ft/min
-
Maximum Pressure2000 psi
-
Maximum Velocity1200 sfpm
-
TypeRound Bore
-
Width7/8 in
-
Bearing MaterialSAE 841 Powdered Metal/Oil Impregnated Bronze
-
Outside Diameter3/4 in
-
Bore Diameter1/2 in
- Standard stock products
- SAE 841 copper (87 to 90%), tin (8 to 9%), carbon and other elements
- Powdered metal bronze providing interconnected reservoirs for oil
- Vacuum impregnated with SAE 30 oil during the manufacturing process
- Self-lubricating, when in motion oil rises to the surface for lubrication and restores itself when at rest
- Ideal for heavy loads at moderate speeds or light loads at high speeds
-
Alternative Part NumberFB-812-7
-
UNSPSC31171501
-
Package Description1/PK
-
Standards/ApprovalsROHS|REACH|DFARS Compliant|PROP65: This product can expose you to chemicals including polybrominated biphenyls which is known to the state of California to cause cancer and cadmium which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Oilube® 302044 Round Bore Flange Bearing, 1/2 in Dia Bore, 3/4 in OD, 7/8 in W, 1 in Dia Flange
1/2" -IDX3/4" -OD VITON O-RINGS
Schneider Electric Square D™ TeSys™ GV2 GV2ME06 Non-Reversing Manual Motor Starter With Thermal Magnetic Circuit Protector, 3 Poles, IP20 Enclosure
The GV2 manual starter and protector provides manual isolation, manual motor control, and thermal overcurrent protection in one compact unit. The basic motor starter GV2ME controls motors with full load currents up to 32 A. The manual starter is three pole with horsepower ratings. The manual starter is operated by push buttons. The Class 10 ambient compensated thermal over current is adjustable from 1 ampere to 1.6 ampere. This device has screw clamp terminals. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX).
Dixon® GL355 Standard Dry Gauge, 0 to 1000 psi, 1/4 in Connection, 2-1/2 in Dial, +/- 3-2-3 %
Dixon® GL355 Standard Dry Gauge, 0 to 1000 psi, 1/4 in Connection, 2-1/2 in Dial, +/- 3-2-3 %
WATTS® 0066107 100XL Self-Closing Temperature and Pressure Relief Valve, 3/4 in Nominal, MNPT x FNPT End Style, 150 psi Pressure, 180 deg F, 3 in L Probe, Brass Body
This 3/4 inch temperature and pressure relief valve is used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. It features a brass body with NPT male inlet and NPT female outlet connections, 8 inch extension thermostat with special thermo-bonded coating, and a test lever. It is ASME rated and CSA listed. The temperature relief is at 180 degrees F, and the pressure relief is 150 psi (10.6 bar).
MORSE® 43117 1887 Ball Nose Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL, Bright
