ISOSTATIC™ Century® 106501 Solid Bar, 1/2 in OD, 13 in OAL, SAE 660 Cast Bronze
ISOSTATIC™ Century® 106501 Solid Bar, 1/2 in OD, 13 in OAL, SAE 660 Cast Bronze
-
BrandISOSTATIC™
-
UPC846802026257
-
Manufacturer Part Number106501
-
CountryUSA
-
Temperature Rating-450 to 450 deg F
-
MaterialSAE 660 Cast Bronze
-
Diameter1/2 in OD
-
Overall Length13 in
- Standard stock products
- SAE 660/CA 932 copper 83%, tin 7%, lead 7% and zinc 3%
- Non-porous, highly dense grain structure for long life
- Offers good hardness, strength and wear resistance, excellent anti-frictional characteristics
- Tensile strength of 35000 psi, yield strength of 27000 psi and brinell hardness of 72
- Ideal for heavy loads at moderate speeds or light loads at high speeds
- Products made with excess material to finish to stated nominal dimensions
-
Alternative Part NumberBS0004-13
-
UNSPSC31171500
-
Package Description1/PK
-
Standards/ApprovalsASTM B505|QOC-390B Type III B144-52-3B|REACH Compliant|PROP65: This product can expose you to chemicals including lead which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65WARNINGS.ca.gov
-
Specification Sheet
-
Catalog
Recently Viewed
ISOSTATIC™ Century® 106501 Solid Bar, 1/2 in OD, 13 in OAL, SAE 660 Cast Bronze
ISOSTATIC™ Century® 106501 Solid Bar, 1/2 in OD, 13 in OAL, SAE 660 Cast Bronze
GENERAL® 88CM Scriber, Tungsten Carbide Straight Tip, Knurled Grip Handle, 6 in L
The NO 89 Tungsten Carbide Point Scriber/Etching Pen with Magnet can mark and scribe steelin, ceramic and glass. The magnet can retrieve small ferrous and steel parts and chips from hard-to-reach places.
ISOSTATIC™ Century® 106007 Round Bore Cored Bar, 1/2 in ID x 2 in OD, 13 in OAL, SAE 660 Cast Bronze
ISOSTATIC™ Century® 106007 Round Bore Cored Bar, 1/2 in ID x 2 in OD, 13 in OAL, SAE 660 Cast Bronze
BBI 858260 Kep® Lock Nut, 3/8-16, Low Carbon Steel, Zinc CR+3, Right Thread
BBI 497218 Fully Threaded Heavy Structural Bolt, 3/4-10, 1-3/4 in L Under Head, Steel Alloy, Hot Dipped Galvanized
BBI 497218 Fully Threaded Heavy Structural Bolt, 3/4-10, 1-3/4 in L Under Head, Steel Alloy, Hot Dipped Galvanized
Starrett® 70A Pocket Scriber With 2-3/8 in Long Point, Steel Tapered Tip, Knurled Grip Handle, 5 in L
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
