Dodge® 069471 207 Imperial Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL 5.59 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
-
BrandDodge®
-
UPC782475308200
-
Manufacturer Part Number069471
-
CountryUSA
-
Load Capacity39000 lb Dynamic/47500 lb Static
-
Locking DeviceAdapter Mounted
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed3800 rpm
-
TypeImperial
-
Mounting TypeTwo-Bolt Base
-
Seal TypeLabyrinth
-
Base Width2.86 in
-
Base to Bore Centerline2-3/4 in
-
Bolt Center-to-Center Length6.94 to 7.31 in
-
Bore Diameter2-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height5.59 in
-
Overall Length9-1/4 in
-
Overall Width3.42 in
-
Temperature Rating-100 to 200 deg F
-
Series207
- Superior holding power reduces the fretting corrosion caused by vibration
- Push pull adapter mount
- Grease limiting speeds 30% higher than set screw mounts
- Seal/land on OD of inner ring maintains full contact pressure even when misaligned
- Patented adapter mounting system
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 100942102 |
| Motion Industries | 02317675 |
-
Alternative Part NumberP2B-IP-207L|69471
-
UNSPSC31171511
-
Standards/ApprovalsUL Listed
-
Specification Sheet
-
Catalog
-
Specification Sheet
Recently Viewed
Dodge® 069471 207 Imperial Pillow Block Roller Bearing Unit, 2-7/16 in Dia Bore, 6.94 to 7.31 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/4 in OAL 5.59 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
Browning® 1045368 VP Series Type 1 Variable Pitch Sheave, 3/4 in Finished Bore, 4.15 in OD, 1 Groove, 2.7 to 3.5 in (3L)/3 to 4 in (A/4L)/3.2 to 4.2 in (B/5L) Dia Pitch, 21/32 to 1-1/32 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
2-VP-068-1-1/4 2-grv Variable Pitch Sheaves
2-GRV VARIABLE PITCH SHEAVES -IDC2VP06811/4 >
FIBERGLASS DOUBLE LAUNDRY TUB-JWH436488 >
Porter-Cable® 2620 Electric Drill, 3/8 in Chuck, 120 VAC, 1200 rpm Speed, Tool Only
Series 7000 is very robust and ideal for the most demanding applications. The reel's base and guide arm are formed from high grade steel engineered with structural forms and gussets to yield the greatest amount of strength. The standard low pressure hose is for air or water service only. The basic reel without hose can be used for air, water or oil. Guide arm adjusts to three positions.
