Sealmaster 2-3/16"-ID 2-BOLT TRB PILLOW BLOCK SEA RPB-203-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
-
BrandSealmaster®
-
UPC662288480013
-
Manufacturer Part Number550215
-
CountryUSA
-
Load Capacity8570 lb Dynamic
-
Locking DeviceDouble Set Screw
-
Temperature Rating250 deg F
-
FinishUncoated
-
MaterialCast Iron
-
Maximum Speed2500 rpm
-
TypeStandard-Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeFelt
-
SeriesRPB
-
Base Width2-9/16 in
-
Base to Bore Centerline2-1/2 in
-
Bolt Center-to-Center Length6-11/16 to 7-15/16 in
-
Bore Diameter2-3/16 in
-
Bore TypeRound/Tapered
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height5-1/8 in
-
Overall Length9-5/8 in
-
Overall Width3-3/4 in
- Heavy duty tapered roller bearings with steel cage for radial, thrust and combined loading
- Race-mounted felt-lined flinger seal
- Double-collar interlock with 120 deg spacing setscrew lock, diamond faceted setscrews
- Powder coat epoxy 2-bolt split cast iron housing
- Powder coat epoxy 2-bolt split cast iron housing
-
Alternative Part NumberRPB-203-2
-
UNSPSC31171511
-
Package DescriptionEACH
-
Standards/ApprovalsABMA Certified
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Sealmaster 2-3/16"-ID 2-BOLT TRB PILLOW BLOCK SEA RPB-203-2
The Sealmaster® RPB mounted tapered roller bearings are a dimensionally interchangeable upgrade from competitive type E bearings. The exclusive features include unitized replaceable inserts, self-aligning capability and split housing. They also include the Sealmaster® alignment pin. This provides a direct path for lubrication into the bearing and helps to prevent outer race rotation. The Sealmaster® RPB is available with two traditional setscrew locking collars for easy installation. The felt seal with flinger provide a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in both inch and metric. They provide a wide variety of housing, sealing and lubrication options.
1/8" STEEL BALLS-SSB18 >
3" X 375' REINFORCED KRAFT PAPER TAPE-CASE OF 8 - PAK3X375RPAPERTAPE >
This 1/4 IN OD, 12 inch heavy duty brass threaded stem is designed for use with float valve to control high capacity water flow in commercial, industrial and agricultural applications. It is made of heavy duty brass with 1/4-20 inch NPT threaded ends for valve and float.
20" X 3" MAGNESIUM FLOATS-JWH330500 >
8-MM X 1.25X120-MM HEX HEAD CAPSCREW-MET93108120 >
